AquaPhalt
​Permanent Pothole Repair

Aquaphalt is the first permanent asphalt repair available in the U. S., and it is the cost-effective solution to various repairs.

​Aquaphalt drastically reduces costs, environmental risks, and traffic congestion. Not only is Aquaphalt easy to use even in wet and cold conditions, but no special preparations are required, and roads may be open to traffic immediately. It also has a 12 month shelf life. And did we mention its skid and rutting resistance?

Aquaphalt is the right choice for enduring repairs.
In a recent Virginia Department of Transportation study of the use of Aquaphalt, the site of repair was visited routinely in the first two to three weeks of service to make certain it performed adequately with added inclement weather. The primary roadway distresses of great concern for typical cold mix patching materials are bleeding, rutting and dishing (further compaction under traffic), debonding, raveling and pushing and shoving. After visiting once a month to-date, VDOT officials have found absolutely no signs of pushing, shoving or rutting in the patch—all dangers associated with a weak and unstable mix.

Use on:

• Asphalt roadway patching
• Pothole repair
• Concrete road repairs
• Manhole repairs
• Utility cuts and repairs
• Driveways, pathways and tennis courts

NEW

Pine Power​
Eco Friendly Asphalt and Tar Remover

PinePower is an eco-friendly cleaner.  It’s formulated with agriculturally derived solvents and combined  with terpenes and surfactants. Compared to citrus,  diesel and petroleum based products, PinePower is superior in cleaning and rinsing.  PinePower is over ten times as effective for dissolving asphalt, grease and oil. 

​PinePower easily dissolves bituminous (asphalt) accumulations, grease and oil deposits found on asphalt paving machines, distributors and hot boxes. PinePower’s ingredients are also capable of cleaning baked-on asphalt accumulations found in Hot Boxes. If spilled on asphalt pavement, PinePower can be de-activated with water. 

Directions

• Apply PinePower under pressure using a pump-up sprayer
  
• Allow PinePower to sit on surface until build-up has softened
  
• Rinse off treated equipment with hot water or steam
  
• For heavier deposits, agitate with a brush or scrape.
  

Application

• Asphalt Based Sealers 
• Asphalt Distributors
• Mastic Melters & Applicators
• Hot Boxes
• Paving Equipment and
• Durapatchers Rakes and Shovels
• Tar Based Roofing Equipment

Features

• Economical- Highly concentrated
  
• Use less due to high flash point
  
• 100% Biodegradable
  
• Contains Pine oil, not citrus
  
• No ODCs (Ozone Depleting Chemicals)
  
• Non-Hazar dous, Non HAPs
  
• Rinses easily with water and steam

Benefits

• Superior to diesel and kerosene
  
• High Flash Point
  
• Prevents asphalt from sticking to metal surfaces
  
• Emulsifiable - De-activated with water
  
• No mixing required
  
• Powerful solvent
  
• Breaks down hardened asphalt and co-polymers
  
• Slow evaporation rate. Stays on tools and truck beds longer

HI-PII
​Electrical Contact Cleaner

A non-flammable, high dielectric formula developed to quickly remove oil, grease, flux, condensation, and moisture from delicate electronic circuitry. Dissolves residue and safely flushes away particulate matter. Convenient aerosol provides pinpoint cleaning accuracy and reduces solvent waste. No flammable vapors are created as it dries.

Description

• Hi P II is non-flammable, high di-electric formula. Developed for the quick removal of flux, grease, oil and condensation from delicate electrical circuitry. Dissolves flux residues and flushes away particulate matter. Convenient aerosol packaging provides pin-point cleaning accuracy that reduces solvent waste.
  
• Safe on plastics
  

Application

• Removes flux, grease, oil and moisture from delicate electronic circuitry
  

Industries

• Electrical Maintenance
  
• Printed Circuit Board Manufacturers
  
• Computer Manufacturers
  
• Gambling Casinos
  
• Industrial Plants
  
• Power Plants
  
• Refineries
  
• Cargo Ships
  
• Hospitals
  

Touch It Up
Decontaminant and Cleaner

Touch It Up is used in Nuclear Medicine to remove radioactive isotopes used in various diagnostic procedures. It is an all-purpose cleaner that clings to vertical surfaces. It works by encapsulating contaminants in a dense, dry foam.

Description

• It forms a dense, dry foam that encapsulates low level nuclear radioactivity.
• Spray it on and with one swipe, it removes over 95% of contamination.
• It reduces the amount of nuclear waste generated for disposal.
• Touch It Up is certified by Exelon Power Labs to assure compliance with GE Specs.

Application

• Decontaminates 95% of low levels of nuclear radiation in one swipe
  
• Use on all non-porous surfaces
  
• Use on tools, tables, tread mills, floors, glass, mirrors
  

Industries

• Nuclear Power
  
• Nuclear Medicine
  
• Hospitals
  
• Health Care Facilities
  
• Government
  

Blast
​High Pressure Air Duster

Blast puts high pressure precision dusting at your fingertips. Used extensively in photo, chemical, computer and electronic assembly, repair and manufacturing operations.

Description

• Blast is an eco friendly air duster.
  
• 100% Ozone Safe and 100% Non VOC.
  
• Safe on plastics, sensitive components, and most finishes.
  

Application

• Blast is a high-pressure, moisture free gas that removes microscopic dirt, dust, lint, iron oxide deposits and paper that normal hand dusting can’t reach.
  
• Blast is safe on plastics, non-abrasive and leaves no residue.
  

Industries

• ​Computer Printers
  
• Fax Machines
  
• Copiers
  
• Disk Drives
  
• Electromagnetic Devices
  
• Timing Devices
  
• Card Strip Pick Up Units
  
• Optical Pick Ups
  
• Clean Rooms
  
• Data Processing
  
• Electronics
  
• Photo Labs
  
• Automotive Maintenance
  

Parts Kleen
Non Chlorinated Solvent/Degreaser

Parts Kleen Aerosol is a Solvent Designed to remove dirt, grease, and grime from metallic and non-metallic surfaces.
Cleaning is quick and simple without the danger of injury to working parts. Parts Kleen Aerosol is safe for use on most plastics.

Description

• A safe replacement for chlorinated and other solvents with a rapid evaporation rate.
  
• Offers superior cleaning and degreasing properties.
  
• Leaves no residue upon evaporation, therefore safe for both electrical and mechanical applications.
  
• Has a Di-Electric strength of over 26,000 volts.
  
• Has a high solvency rating (KB) of 50.
  

Application

• Removes grease, grime, tar and dirt from metallic and non-metallic surfaces
  

Industries

• Automotive
  
• Construction
  
• Industrial, electrical and mechanical maintenance
  
• Transportation (railroads, trucking)
  
• Agriculture c v