Products
Here at SPC Speciality Products, our products are created with the highest quality materials and assembled with the most advanced techniques available. From ideation through execution, we are proud of everything we produce here. We’re sure you’ll be satisfied with our products just like all of our past customers. Check out our selection below.
AquaPhalt – Permanent Pothole Repair
Aquaphalt is the first permanent asphalt repair available in the U. S., and it is the cost-effective solution to various repairs.
Applications
Aquaphalt drastically reduces costs, environmental risks, and traffic congestion. Not only is Aquaphalt easy to use even in wet and cold conditions, but no special preparations are required, and roads may be open to traffic immediately. It also has a 12 month shelf life. And did we mention its skid and rutting resistance?
Aquaphalt is the right choice for enduring repairs.
In a recent Virginia Department of Transportation study of the use of Aquaphalt, the site of repair was visited routinely in the first two to three weeks of service to make certain it performed adequately with added inclement weather. The primary roadway distresses of great concern for typical cold mix patching materials are bleeding, rutting and dishing (further compaction under traffic), debonding, raveling and pushing and shoving. After visiting once a month to-date, VDOT officials have found absolutely no signs of pushing, shoving or rutting in the patch—all dangers associated with a weak and unstable mix.
Industries
Use on:
Asphalt roadway patching
Pothole repair
Concrete road repairs
Manhole repairs
Utility cuts and repairs
Driveways, pathways and tennis courts
Bitu-Solv
BituSolv – Eco Friendly Tar and Asphalt Remover
IN STOCK!
CALL US FOR BULK PRICING
BituSolv is the next generation of cleaners. It is formulated with both the environment and effectiveness in mind. It is biodegradable yet a very strong cleaner for the toughest kinds of jobs. It removes asphalts and other emulsions from spray equipment with ease. It is non-hazardous for disposal and shipping.
BituSolv sticks to vertical surfaces and works to dissolve asphalt, tar and emulsions. Simply spray it on, let it set for 10-15 minutes and rinse it off with high pressure-hot water. Highly cost effective if used with an oil-water separator. Safe to dispose of product down sewer, after contaminants are separated out.
Description
BituSolv is made from agriculturally-derived solvents
100% biodegradable, non-carcinogenic and non-toxic
Over 10-times more effective than petroleum-based solvents
No hazardous air pollutants (HAPs) and Non hazardous for disposal
No environmentally hazardous ingredients
No ozone depleting chemicals
Ready to use, no mixing needed
Applications
Dissolves and removes asphalt on asphalt paving, trucks, rollers, roofing equipment
Benefits
New eco-friendly formulation
Easy and cost-effective disposal
Safe and easy to work with
Industries
Construction
Roofing
Local, State and Federal Government
Trucking
Paving

Product
ODM – Organic Cleaner/Degreaser
IN STOCK!
Call us for bulk pricing
A 100% Organic emulsion cleaner/degreaser, ODM is biodegradable and environmentally safe. Its non-corrosive properties make it a great product to control odor, unclog drains and remove tar and asphalt from most hard surfaces.
Description
ODM is formulated from the highest quality orange and bio-engineered solvents.
It is a 100% organic emulsion cleaner/degreaser.
It’s able to be diluted for a variety of applications.
ODM is our most versatile product! Cleans everything from dirt and grime to ink and glue and everything in between!
Applications
All purpose cleaner, including tar, asphalt, adhesives, vandalizm, most printing inks
Biodegradable, Non-corrosive, 100% organic, highly concentrated
Unclogs drains and controls odors
Removes tire marks, decals
Cleans barbeque grills
All purpose household cleaner
Removes magic marker
Cleans bilges
Industries
Printing
Agriculture
Automotive
Construction
Building Maintenance
Food Service

Product
Touch It Up Decontaminant and Cleaner
IN STOCK!
CALL US FOR BULK PRICING
Touch It Up is used in Nuclear Medicine to remove radioactive isotopes used in various diagnostic procedures. It is an all-purpose cleaner that clings to vertical surfaces. It works by encapsulating contaminants in a dense, dry foam.
Description
It forms a dense, dry foam that encapsulates low level nuclear radioactivity.
Spray it on and with one swipe, it removes over 95% of contamination.
It reduces the amount of nuclear waste generated for disposal.
Touch It Up is certified by Exelon Power Labs to assure compliance with GE Specs.
Applications
Decontaminates 95% of low levels of nuclear radiation in one swipe
Use on all non-porous surfaces
Use on tools, tables, tread mills, floors, glass, mirrors
Industries
Nuclear Power
Nuclear Medicine
Hospitals
Health Care Facilities
Government

Product
Parts Kleen Non Chlorinated Solvent/Degreaser
IN STOCK!
CONTACT US FOR BULK PRICING
Parts Kleen Aerosol is a Solvent Designed to remove dirt, grease, and grime from metallic and non-metallic surfaces.
Cleaning is quick and simple without the danger of injury to working parts. Parts Kleen Aerosol is safe for use on most plastics.
Description
A safe replacement for chlorinated and other solvents with a rapid evaporation rate.
Offers superior cleaning and degreasing properties.
Leaves no residue upon evaporation, therefore safe for both electrical and mechanical applications.
Has a Di-Electric strength of over 26,000 volts.
Has a high solvency rating (KB) of 50.
Applications
Removes grease, grime, tar and dirt from metallic and non-metallic surfaces
Industries
Automotive
Construction
Industrial, electrical and mechanical maintenance
Transportation (railroads, trucking)
Agriculture c v

Product
HI-PII Electrical Contact Cleaner
IN STOCK!
Contact us for bulk pricing
A non-flammable, high dielectric formula developed to quickly remove oil, grease, flux, condensation, and moisture from delicate electronic circuitry. Dissolves residue and safely flushes away particulate matter. Convenient aerosol provides pinpoint cleaning accuracy and reduces solvent waste. No flammable vapors are created as it dries.
Description
Hi P II is non-flammable, high di-electric formula. Developed for the quick removal of flux, grease, oil and condensation from delicate electrical circuitry. Dissolves flux residues and flushes away particulate matter. Convenient aerosol packaging provides pin-point cleaning accuracy that reduces solvent waste.
Safe on plastics
Applications
Removes flux, grease, oil and moisture from delicate electronic circuitry
Industries
Electrical Maintenance
Printed Circuit Board Manufacturers
Computer Manufacturers
Gambling Casinos
Industrial Plants
Power Plants
Refineries
Cargo Ships
Hospitals

Product
Blast – High Pressure Air Duster
IN STOCK!
CONTACT US FOR BULK PRICING
Blast puts high pressure precision dusting at your fingertips. Used extensively in photo, chemical, computer and electronic assembly, repair and manufacturing operations.
Description
Blast is an eco friendly air duster.
100% Ozone Safe and 100% Non VOC.
Safe on plastics, sensitive components, and most finishes.
Applications
Blast is a high-pressure, moisture free gas that removes microscopic dirt, dust, lint, iron oxide deposits and paper that normal hand dusting can’t reach.
Blast is safe on plastics, non-abrasive and leaves no residue.
Industries
Use on:
Computer Printers
Fax Machines
Copiers
Disk Drives
Electromagnetic Devices
Timing Devices
Card Strip Pick Up Units
Optical Pick Ups
Clean Rooms
Data Processing
Electronics
Photo Labs
Automotive Maintenance